| Anmol Chemicals is the pioneer manufacturers of Zinc Gluconate USP FCC Food BP Ph Eur Grade, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Zinc Gluconate USP FCC Food BP Ph Eur Grade made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Zinc Gluconate USP FCC Food BP Ph Eur Grade is in these pages. |
| The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal |
----------
Zinc Gluconate USP FCC Food BP Ph Eur Grade Suppliers Manufacturers Exporters
CAS Number: 4468-02-4, Molecular Weight: 455.68, Chemical Formula: C12H22ZnO14.(xH20), EINECS EC Number: 224-736-9
SDS GHS MSDS Sheet of Zinc Gluconate Manufacturers Exporters
Zinc Gluconate USP Grade Specifications
C12H22O14Zn --- 455.68
Bis(D-gluconato-O1,O2) zinc.
Zinc D-gluconate (1:2) [CAS 4468-02-4].
Zinc Gluconate contains not less than 97.0 percent and not more than 102.0 percent of C12H22O14Zn, calculated on the anhydrous basis.
Identification:
A: A solution (1 in 10) responds to the tests for Zinc.
B: Chromatographic plate test.
pH: between 5.5 and 7.5, in a solution (1 in 100).
Water: not more than 11.6%.
Chloride: A 1.0-g portion shows no more chloride than corresponds to 0.70 mL of 0.020 N hydrochloric acid (0.05%).
Sulfate: A 2.0-g portion shows no more sulfate than corresponds to 1.0 mL of 0.020 N sulfuric acid (0.05%).
Arsenic: the limit is 3 ppm.
Reducing substances: the limit is 1.0%.
Limit of cadmium: the limit is 5 ppm.
Limit of lead: To pass the test (0.001%).
Zinc Gluconate FCC Food Grade Specifications
C12H22O14Zn Formula wt 455.68
CAS: [4468-02-4]
DESCRIPTION
Zinc Gluconate occurs as a white or nearly white, granular or crystalline powder and as a mixture of various states of hydration, up to the trihydrate, depending on the method of isolation. It is freely soluble in water and very slightly soluble in alcohol.
Function: Nutrient
REQUIREMENTS
Identification:
A. A 1:10 aqueous solution gives positive tests for Zinc.
B: Chromatographic plate test.
Assay: Not less than 97.0% and not more than 102.0% of C12H22O14Zn, calculated on the anhydrous basis.
Cadmium: Not more than 2 mg/kg.
Chloride: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Reducing Substances: Not more than 1.0%.
Sulfate: Not more than 0.05%.
Water: Not more than 11.6%.
Specifications of Zinc Gluconate BP Ph Eur Grade:
C12H22ZnO14,xH2O --- 455.7 (anhydrous substance)
DEFINITION
Anhydrous or hydrated zinc D-gluconate.
Content: 98.0 per cent to 102.0 per cent (anhydrous substance).
CHARACTERS
Appearance: White or almost white, hygroscopic, crystalline powder.
Solubility: Soluble in water, practically insoluble in anhydrous ethanol and in methylene chloride.
IDENTIFICATION
A. Thin-layer chromatography to pass the test.
B. Dissolve 0.1 g in 5 mL of water. Add 0.5 mL of potassium ferrocyanide solution. A white precipitate is formed that does not dissolve upon the addition of 5 mL of hydrochloric acid.
TESTS
Solution S: Dissolve 1.0 g in water R and dilute to 50 mL with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension II and not more intensely coloured than reference solution.
Sucrose and reducing sugars: Dissolve 0.5 g in a mixture of 2 mL of hydrochloric acid and 10 mL of water. Boil for 5 min, allow to cool, add 10 mL of sodium carbonate solution and allow to stand for 10 min. Dilute to 25 mL with water and filter. To 5 mL of the filtrate add 2 mL of cupri-tartaric solution and boil for 1 min. Allow to stand for 2 min. No red precipitate is formed.
Chlorides: Maximum 500 ppm.
Sulfates: Maximum 500 ppm.
Cadmium: Maximum 2 ppm.
Water: Maximum 12.0 per cent, determined on 80.0 mg.
Microbial contamination:
TAMC: acceptance criterion 1000 cfu/g.
TYMC: acceptance criterion 100 cfu/g.
We also manufacture Micro-encapsulated Zinc Gluconate. Hydrogenated Vegetable Oil is generally used for making Micro-encapsulated Zinc Gluconate.
Zinc Gluconate USP FCC Food BP Ph Eur Grade Suppliers Manufacturers & Micro-encapsulated Zinc Gluconate Manufacturers
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: anmolc@mtnl.net.in
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable. 15 January, 2022